| 44cup.com Forums http://forum.44cup.com/ |
|
| F'S 911 hpde project http://forum.44cup.com/viewtopic.php?f=16&t=2354 |
Page 1 of 1 |
| Author: | markwemple [ Sun Feb 23, 2014 10:38 am ] |
| Post subject: | F'S 911 hpde project |
Been building this car for a while and with 2 little ones progress is slow. So I'm looking to buy big Joe ' s 44cup. Anyway, 1978 911sc. RS door panels and carpets. Fiberglass turbo flares and bumpers. 1/2" headers and brush muffler so no heat. Racing seats and belts both out if date so the seats would need braces and the belts rewebbed. Bolt in full cage. Delrin bushings. Well meister sways. 21/28 torsion bars. Adjustable spring plate. Engine is stock but has pop off valve, Carrera tensioner and air pump delete. Wheels are cup copies with early off set. One set of wheel spacers so you'll need another. 1 verified broken head stud. Turbo tie rod ends. Sound deadening removed. Needs a windshield and seal. Has stock targa top in poor shape and a fiberglass top as well. New brake master and ss lines. Bronze pedal bushings. Bronze shifter bushings if I can find them. Also replaced the all the bushings with the throttle assembly. Has and euro tail lights may go with it. Crappy paint and some surface rust. I'll keep updating as I think of things and working on pictures. TIA |
|
| Author: | markwemple [ Wed Feb 26, 2014 9:49 am ] |
| Post subject: | Re: F'S 911 hpde project |
Also includes a pair of solid mounts and sport mounts. I was going to put the solid on the trans and sports on the engine. Also steel lug nuts all around. |
|
| Author: | markwemple [ Mon Mar 03, 2014 2:28 pm ] |
| Post subject: | Re: F'S 911 hpde project |
1 1/2" headers, Bursch muffler, removed air pump and installed plugs, Carrera tensioners, have the oil lines for the headers. Solid mounts for engine, sport for trans. Suspension: Delrin bushings, front and rear weltmeister sway bars, adjustable spring plates, turbo tie rods, extra bilsteins for re-valving, 22/29 T-bars. Brakes: braided lines, new m/c. Wheels: Cup replicas (I believe 17 x 7&8) with Toyo r888 225/45-17 & 255/40-17, 2" spacers in the rear, Steel lug nuts. Interior: Blue OMP seat, Black Corbeau (wide), Blue Simpson 5 pt cam harness, Black 5 pt cam harness (both out of date), RS door panels, RS carpet set, safety devices full bolt in cage, momo steering wheel w/Porsche crest. Bronze bushings for pedals and probably for shifter. Body: Turbo flares, not installed so still stock panes intact, turbo front and rear bumpers with openings in front for brake ducts and oil cooler. Choice of 2 tails. 1st fake turbo needs minor repair, Other is a real IROC that needs major repair. Also have a very light fiberglass targa top, along with stock one that needs recovering. Car needs finishing, windshield, seal and rust repair around the windshield, 1 broken head stud and an exhaust stud that needs repair. Paint is crappy at best. Tires are near the end of their life. |
|
| Author: | markwemple [ Mon Mar 03, 2014 2:50 pm ] |
| Post subject: | Re: FS 911 hpde project |
Also, bronze pedal and shifter bushings. |
|
| Author: | markwemple [ Tue Jan 30, 2018 9:33 am ] |
| Post subject: | Re: F'S 911 hpde project |
Sold |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|