View unanswered posts | View active topics It is currently Tue Oct 24, 2017 12:55 am



Reply to topic  [ 2 posts ] 
Charley arm replacement pin question 
Author Message
Rookie Driver

Joined: Dec 15, 2009
Posts: 37
I am in the process of installing a set of charley arms on my 1988 944 SP2 car. I currently have a 951 brake set-up on the car, with 951 hubs and spindles and the original lower a-arms.

My technician informed me that the pins on the charley arms are of a larger diameter than what my car will allow and that I will either need to sources pins for the correct diameter or have the existing pins machined to fit the spindle.

My question is what is the correct diameter pin for a 951 spindle and is there a source for extended length pins (my car is lower by nearly 2" in the front) that will fit a 951 spindle? I will machine the pins if I need to but I would first rather look for a replacement pin.


Fri Apr 15, 2016 8:42 am
Profile
Moderator
User avatar

Joined: Nov 05, 2009
Posts: 1548
Location: Isle of Palms, SC
would not alter the spindle size/ Get new pins to fit . Think stock measurement is 17 mm.

Or sell the charley arms and buy the HS strung 44 arms that fit the stock spindle and allow the car to be lowered safely

https://www.facebook.com/highstrung44#

_________________
Dave Derecola
National Director
944 Cup
cup944@aol.com


Fri Apr 15, 2016 12:49 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software.