Author |
Message |
mug23
Rookie Driver
Joined: Jan 31, 2010 Posts: 30
|
schwank wrote: mug23 wrote: Hummm... The wheels are 15x7 early offset and I'm planning to widen them fronts 8" with 225/50/15 and rear to 9" running 275/35/15. You are saying that the early offset can work for my late car even if they get widen? Ah, sorry, that will certainly not work. They work at 7" only... they fill out the fenders to the very limit at 7". Ok, Thank you for your reply.
|
Sun Aug 22, 2010 5:41 pm |
|
|
Racrdave52
Rookie Driver
Joined: Nov 11, 2009 Posts: 52
|
When Weldcraft widens wheels its to the inside an will not change your offset... just saying
_________________ Dave Gibson #52 Cup Mid-Atlantic
|
Mon Aug 23, 2010 10:51 am |
|
|
johntorg
Driver
Joined: Nov 06, 2009 Posts: 126
|
Dave, can you send me the contact information for the company that widens wheels for $125?
Send me your address and I'll send you a DVD of our qualifying race battle.
John
|
Sat Sep 18, 2010 10:37 am |
|
|
comatb
Driver
Joined: Nov 06, 2009 Posts: 144 Location: Burlington, Ontario
|
John, I use James at, Weldcraft Wheels 15091 Northville Rd. Plymouth MI 48170 1-734-420-2211 http://www.weldcraftwheels.comThey charge $175 per wheel and do a very nice welding job. The wheel offset does change. I too am interested in the same job for $125.
_________________ Bill Comat 2012 944 Super Cup Championship - Second Place 2009 944 Cup National Champion
|
Sat Sep 18, 2010 10:56 am |
|
|
johntorg
Driver
Joined: Nov 06, 2009 Posts: 126
|
The $125 number came from Dave Derecola's post. Dave ????
|
Sun Sep 19, 2010 1:01 pm |
|
|
racin44
Rookie Driver
Joined: Nov 06, 2009 Posts: 34
|
johntorg wrote: The $125 number came from Dave Derecola's post. Dave ???? Dave has recommended WeldCraft in the past, quoting the lower price to me as well, but experience has shown the higher price to be correct.
_________________Nick R. Purchase any and ALL racing and safety parts, or let us build or maintain your race car at: http://www.ntechmotorsport.com863 288 9660
|
Mon Sep 20, 2010 2:43 am |
|
|
Director
Moderator
Joined: Nov 05, 2009 Posts: 1634 Location: Isle of Palms, SC
|
Weldcraft is the correct company. Call for estimate. Price can vary depending on how much the wheel is widened and where shipment goes.
_________________Dave Derecola National Director 944 Cup cup944@aol.com
|
Mon Sep 20, 2010 8:28 am |
|
|
GregF
Driver
Joined: Nov 21, 2009 Posts: 216 Location: Redmond, Wa.
|
Are they willing to weld the factory cast aluminum wheels such as the ATS snowflake wheels? I know of several companies that will machine or weld the Fuchs forged alloys to make custom sizes and offfsets, but none of them will weld on a pressure cast wheel for use on a racing car. Greg F.
|
Tue Sep 21, 2010 4:42 pm |
|
|
Director
Moderator
Joined: Nov 05, 2009 Posts: 1634 Location: Isle of Palms, SC
|
I have only been interested in factory fuchs. have seen cookie cutters and phone dials done too.
_________________Dave Derecola National Director 944 Cup cup944@aol.com
|
Tue Sep 21, 2010 8:10 pm |
|
|
JohnB
Rookie Driver
Joined: Jan 20, 2010 Posts: 68 Location: Northern Virginia
|
What was the wheel that failed (at VIR?) earlier this year?
|
Fri Sep 24, 2010 12:38 pm |
|
|