| 44cup.com Forums http://forum.44cup.com/ |
|
| Delete emission control devices http://forum.44cup.com/viewtopic.php?f=2&t=2010 |
Page 1 of 1 |
| Author: | mug23 [ Fri Jun 22, 2012 2:35 pm ] |
| Post subject: | Delete emission control devices |
So, I finally took the car out to a HPDE and the handling was awful as I had no sway bars front or rear and the front suspension had 400lb spring and the rear had stock torsion bars. The understeer was terrible. I just purchased a new set of Ground Control coliover with Koni double adjustable in the front and the rear would be coilover conversion. The good new is that the engine is running strong and did not eat any oil. Now my question is, the car still have all of the emission control system like the charcoal canister, and all the pcv. I really don't understand much about that system and I really like to simplify things up in there and put in a breather tank and a catch can. I'm not sure what to delete and how to reroute the all the hoses. Do any have any detail instructions on what to delete and how to reroute the hoses? |
|
| Author: | SteveR [ Sun Jun 24, 2012 6:56 am ] |
| Post subject: | Re: Delete emission control devices |
Off the top of my head... Take it all out and plug every hole you see in the manifold, throttle body, and air filter box. Connect a breather and catch can to a hose out of the oil filler/breather neck. The only vacuum hoses you need are brake booster and the one that runs across the engine to the fuel pressure regulator and damper. Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|