| 44cup.com Forums http://forum.44cup.com/ |
|
| Cup Class --- Body parts http://forum.44cup.com/viewtopic.php?f=7&t=577 |
Page 1 of 2 |
| Author: | Director [ Sun Nov 21, 2010 6:01 pm ] |
| Post subject: | Cup Class --- Body parts |
Cup Class --- Body parts --- clarifications/proposed changes for 2011: 1)944 Turbo fenders, nose panel and headlamp covers are permitted for all models. 2)Window openings on stock doors can may be modified to improve exiting by covering over window runner gaps. Input welcome. |
|
| Author: | tim pruitt [ Sun Nov 21, 2010 7:30 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
In the process of repainting interior and covering glass runner openings in both doors. Any clarification on do's and dont's? |
|
| Author: | Director [ Sun Nov 21, 2010 9:40 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
tim pruitt wrote: In the process of repainting interior and covering glass runner openings in both doors. Any clarification on do's and dont's? dont go overboard. |
|
| Author: | comatb [ Sun Nov 21, 2010 9:48 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
Director wrote: tim pruitt wrote: In the process of repainting interior and covering glass runner openings in both doors. Any clarification on do's and dont's? dont go overboard. It is totally unclear as to what you consider 'overboard'. I think Tim need a clear understanding of your interpretation. 
|
|
| Author: | Director [ Sun Nov 21, 2010 10:10 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
Fill in or cover over any gaps. |
|
| Author: | comatb [ Sun Nov 21, 2010 10:14 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
Director wrote: Fill in or cover over any gaps. There are cars with angled coverings. What is the limit? |
|
| Author: | Director [ Sun Nov 21, 2010 10:23 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
dont extend beyond the door exterior. |
|
| Author: | psheridan [ Sun Nov 21, 2010 11:15 pm ] | ||
| Post subject: | Re: Cup Class --- Body parts | ||
Director wrote: Fill in or cover over any gaps. Is this an example of what you mean? Does this rule cover/include the custom window frames? vertical rear of the window frame (partially painted black) is actually curved in.
|
|||
| Author: | Director [ Mon Nov 22, 2010 10:54 pm ] |
| Post subject: | Re: Cup Class --- Body parts |
A good looking adaptation. |
|
| Author: | spoiler [ Tue Nov 23, 2010 6:36 am ] |
| Post subject: | Re: Cup Class --- Body parts |
After a round of conversations with a NASA tech inspector from California I fabricated this piece to exactly replicate the rubber trim on the rear of a stock 944 window opening.This negated the hours I spent in the wind tunnel. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|