44cup.com Forums
http://forum.44cup.com/

Cup Class -- Tire Width Limit
http://forum.44cup.com/viewtopic.php?f=7&t=7
Page 1 of 2

Author:  Director [ Thu Nov 05, 2009 9:38 pm ]
Post subject:  Cup Class -- Tire Width Limit

Cup Class -- Tire Width Limit 6:46 PM 11/3/2009


For 2010, a tire width limit of 10.1 inches for Cup class as the published width of the tire on the manufacturer's website.





--------------------------------------------------------------------------------

Cup Daddy


Tim Pruitt
Driver

Offline

170 posts [100%]
Lawrenceville GA

Re: Cup Class -- Tire Width Limit (Director) 6:51 PM 11/3/2009


Tread Width or Section Width??

teamhardent
Driver



Offline

32 posts [100%]
Montreal QC

Re: Cup Class -- Tire Width Limit (Tim Pruitt) 4:00 AM 11/4/2009


Interesting that according to the hoosier catalog, the 275-35-15, that happen to be 10.1 inch in tread width, are only available in A6 and not in R6.

cris.brady
Driver



Offline

226 posts [100%]
landenberg pa

Re: Cup Class -- Tire Width Limit (teamhardent) 5:08 AM 11/4/2009


On the Hooser website, they say the 275-35-15 is available in R6:
https://www.hoosiertire.com/rrtire.htm





--------------------------------------------------------------------------------

- Cris
89 944 na 44Cup/SP2 #88
Tales from the Dark Side of Racing

Director
DD



Online

3899 posts [100%]
Indian Head MD

Re: Cup Class -- Tire Width Limit (cris.brady) 5:36 AM 11/4/2009


Tread Width


--------------------------------------------------------------------------------

Cup Daddy


teamhardent
Driver



Offline

32 posts [100%]
Montreal QC

Re: Cup Class -- Tire Width Limit (cris.brady) 6:36 AM 11/4/2009


Quote, originally posted by cris.brady »
On the Hooser website, they say the 275-35-15 is available in R6:
https://www.hoosiertire.com/rrtire.htm



thanks, I guess my catalog is not up to date




» Return to Cup Rules, Weight Rewards and Points Forum Jump Model Tech Forums » 924/931 944/944S/951 None of the Above Cup Details » Ask Us Cup Entrants Cup Rules, Weight Rewards and Points Official Cup Business Pictures & Movies Random Cup Discussions Sponsorship & Contingency Classifieds » Cup Cars Cup Parts Other Classifieds Sponsor Marketplace Quick Reply


ZeroForum ©2008 RelyNet, Inc.

Author:  tim pruitt [ Tue Nov 24, 2009 6:49 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

Is there a limit on front and rear wheel widths?

Tim

Author:  Director [ Sat Nov 28, 2009 1:50 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

The same limit for both

Author:  comatb [ Sat Nov 28, 2009 6:17 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

tim pruitt wrote:
Is there a limit on front and rear wheel widths?

Tim
Tim the 944 is allowed 8 inch fronts and 9 inch rears under PCA 'stock' preparation rules at 944 Cup weight of 2600 pounds. The same car can go one inch wider than this under the PCA 'prepared' rules at 2700 pounds in 944 Cup at 2700 pounds. The 944 Spec is limited to 15 X 7 wheels all around.

Author:  lsdumoff [ Sun Nov 29, 2009 1:42 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

comatb wrote:
tim pruitt wrote:
Is there a limit on front and rear wheel widths?

Tim
Tim the 944 is allowed 8 inch fronts and 9 inch rears under PCA 'stock' preparation rules at 944 Cup weight of 2600 pounds. The same car can go one inch wider than this under the PCA 'prepared' rules at 2700 pounds in 944 Cup at 2700 pounds. The 944 Spec is limited to 15 X 7 wheels all around.


Bill I haven't seen a change to the Cup Car prepared weight of 2750 lbs.

Author:  comatb [ Sun Nov 29, 2009 2:13 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

lsdumoff wrote:
comatb wrote:
tim pruitt wrote:
Is there a limit on front and rear wheel widths?

Tim
Tim the 944 is allowed 8 inch fronts and 9 inch rears under PCA 'stock' preparation rules at 944 Cup weight of 2600 pounds. The same car can go one inch wider than this under the PCA 'prepared' rules at 2700 pounds in 944 Cup at 2700 pounds. The 944 Spec is limited to 15 X 7 wheels all around.


Bill I haven't seen a change to the Cup Car prepared weight of 2750 lbs.

You're right Larry it was 2750 in 2009 and the 2010 rules have not been finalized, so the 2700 is speculation at this point. The weights in my response were only used in reference to the original question regarding wheel widths.

Tim the simple answer is 8's and 9's in stock and 9's and 10's in prepared for a 944 under the PCA preparation rules.

Author:  Director [ Mon Dec 07, 2009 11:44 am ]
Post subject:  Re: Cup Class -- Tire Width Limit

Consideration is being given to allow a bit wider tire for Cup class Prepared as we allow fender flares for wider wheels and tires.

Author:  tim pruitt [ Tue Dec 08, 2009 6:31 pm ]
Post subject:  Re: Cup Class -- Tire Width Limit

Good idea, since you are allowing 1" wider fenders. It would be nice to be able to use tire widths up to 10.9" in PCA Prepared. The 275/40/17 (10.3"), P295/35ZR17 (10.8"), P275/35ZR18 (10.3") or P285/30ZR18 (10.9") in the PCA Prepared Classes. :geek:

Author:  Director [ Wed Dec 09, 2009 12:43 am ]
Post subject:  Re: Cup Class -- Tire Width Limit

Look for a 10.3 inch wide tire per manufacturer specs.

Author:  MattMarks [ Tue Nov 30, 2010 9:06 am ]
Post subject:  Re: Cup Class -- Tire Width Limit

DD - looking to collate tire specs as some of these came over from the old forums and have superceded the PDF rules

As I understand it - for Cup class

1) Cars must run DOT approved tires
2) Max width is 10.3 inches per manufacturers spec
3 944 Spec cars must run the Toyo RA1 or R888 in the approved size - 225/50/15

Have I missed anything?

Thanks!

Matt

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/